Nanoleaf 4D User Manual

If you’d like your Nanoleaf 4D products to sync up with other Nanoleaf RGB lights, it’s important that you place them in the same room (both physically and on the app when assigning devices to rooms).

The Nanoleaf Sync+ feature virtually connects your lights within your 3D space to extend screen mirroring lighting effects across multiple Nanoleaf RGB devices.

Once pairing is complete, indicate whether your camera is set up above or below your TV screen or monitor.

Follow the instructions on the App to calibrate your Lightstrip and/or camera. You can always recalibrate your Nanoleaf 4D products by going to your 4D device settings and clicking on Calibration.

Tips for best results:

1. Close curtains or turn off ambient lighting before calibration
2. If camera is mounted on top, tilt to a lower angle so that it can see the whole screen
3. Turn on your TV while calibrating so that the screen contrasts against the frame and the corners are easier to locate
4. Move all the calibration points slightly closer together, further away from the edge of the screen to reduce the room for error

Enable Sync+ if you would like your screen mirroring to flow across multiple Nanoleaf RGB light products in the same room. See the “Enabling Sync+” section below for more detailed instructions.