A local network API designed to extend your product experience. Integrate your setup with third party devices and services and enable more granular control of the hardware.
Table of Content
Lines User Manual
Large Installations (18+ Panels)
Select a Product:
Lines 60 Degrees Lines 90 Degrees
Each standard 42W PSU supports up to 18 Lines (2W per line). You can connect up to 250 Lines in one layout. Adjust Your Power Supplies for Optimal Performance.
1
Activate Power Diagnostic Mode
If you have more than 18 Lines and/or multiple Power Supplies in your Lines setup, you should try to distribute Power Supplies across your layout evenly. Activating Power Diagnostic Mode will give you tips on where you can place your Power Supplies for optimal performance.
On your Controller, hold the Dim (–) and Brighten (+) buttons down together for 5 seconds.
2
Open the Nanoleaf App
If your setup is already optimized, these warnings will not appear and Power Diagnostic Mode will be inaccessible.
For iOS Devices
- Open the MORE menu.
- Select SETTINGS > WARNINGS > Power Limited
For Android Devices
- Open the side menu.
- Select SETTINGS > WARNINGS > Power Limited
3
Distribute Power Supply
Red: Power supply needs to be moved.
Green: Power supply is in good placement.
Blue: Number of missing Power Supplies and the best places for those supplies.
White: Alternative place to add a power supply. The brighter the panel, the better the placement.
42W: One (1) 42W Power Supply Unit comes with any Nanoleaf Lines Starter Kit.
**Excludes Nanoleaf Essentials