Multicolor Floor Lamp User Manual

Watch our video tutorial, or refer to the written instructions below to install your lamp.

Connect an Open-Ended Pole Piece to the Base by aligning the holes on the Pole to the Connector attached to the Base. Insert Screws and tighten with the Magnetic Screwdriver—rotating clockwise until securely fastened.

Now connect the second Open-Ended Pole Piece to the newly extended Base. Place a Connector between the two Open-Ended Pole Pieces—make sure the Connector has its flat smooth face exposed while the face with grooves align with the round shape of the Pole. Insert Screws into the holes and tighten with the Magnetic Screwdriver. Rotate clockwise until firmly secured.

Connect the last Pole Piece (with the attached top cap). Use a Connector, align the holes and secure using the same method as above. Ensure all Screws are tightened and that the Pole Piece with the Attached Top Cap is positioned at the top of the structure.

Insert the Silicone Lightstrip into the top of the Pole. Wrap your hand around the Pole and firmly push the Lightstrip into place using the ball of your palm. Ensure the end of the Lightstrip aligns with the Top Cap.

Secure the Lightstrip in the middle section of the Pole using the same method as before—wrapping your hand around the Pole and firmly pushing the Lightstrip into place with your palm. As you do this, you’ll notice the wave shape of the lightstrip beginning to take form.

Begin by connecting the Lightstrip Wire to the Base Wire, ensuring they snap together securely. Keep a firm grip on the Base Wire as you connect it to the Lightstrip Wire, and ensure they are securely connected before processing to the next step.

Next, insert the Silicone Lightstrip into the bottom of the Pole. Push the Silicone Lightstrip firmly into the base and bottom of the Pole until the connector is fully concealed and no longer visible.

Finally, push the remaining sections of the Lightstrip firmly into the Pole until they are fully secured in place.

If you have excess Lightstrip after assembly, DO NOT cut it. Instead, press and slide the Lightstrip slightly upwards and downwards along the pole until it gets into the right position.

Connect the Controller and Power Supply to the Floor Lamp. Plug into a power outlet to turn on your Floor Lamp and enjoy the ambience! Pair your Floor Lamp to the Nanoleaf App for further customization and control.