Elige la moneda
  • Estados Unidos
    Dólar estadounidense
    USD (US$)
  • Internacional
    Dólar de Hong Kong
    HKD (HK$)
  • India
    Rupia india
    INR (₹)
  • Indonesia
    Rupia indonesia
    IDR (Rp)
  • Japón
    Yen japonés
    JPY (¥)
  • Corea del Sur
    Won coreano
    KRW (₩)
  • Malasia
    Ringgit malayo
    MYR (RM)
  • Filipinas
    Peso filipino
    PHP (₱)
  • Singapur
    Dólar de Singapur
    SGD (S$)
  • Tailandia
    Baht tailandés
    THB (฿)
  • Taiwán
    Dólar taiwanés
    TWD (NT$)
  • Vietnam
    Đồng vietnamita
    VND (₫)
Carrito de compras
Tu carrito está vacío
Subtotal
0
Puntos para ganar en el carrito:
+6190 puntos
?
¡se agregó a tu carrito!
retirado. ¡se agregó a tu carrito!
¡retirado de tu carrito!
deshacer

Skylight User Manual

Setting up the Main Controller Panel

For Your Safety:
  1. Before you start, turn off the power of your main circuit.
  2. Plan out your layout. Align and mark the panels of your desired layout on the ceiling.
For Your Safety
Video tutorial for Setting up
1

Mount the Main Controller Panel

Mount the Main Controller Panel
  • Turn the circuit power and the light switch off before you start.

  • To open the Main Controller Panel(A):

    First

    Pull the clear tape on the panel.

    Second

    Insert a flat head screwdriver into one of the small notches along the seam. Slightly twist the screwdriver.

    Main Controller Panel(A) 1
    Main Controller Panel(A) 2
  • Remove the L Shape Cover to reveal the terminal block for wiring.

    L Shape Cover
  • Remove the Ceiling Plate by unscrewing the Wing Nuts (C).

    Wing Nuts (C)
  • If mounting with the Ceiling Plate, ensure that the wires are positioned through the hole of the plate with a suitable length visible

  • Fasten the Ceiling Plate so that it is parallel to your desired panel alignment.

    Ceiling Plate
    Ceiling Plate 2
  • The Main Controller Power Wires (L) attached to the Main Controller Panel (A) can be connected with junction box wires using the included Binding Posts (H).

    Black = Live wire

    White = Neutral wire

  • Make sure the wires are secure and connected to the corresponding wires.

    Corresponding Wires
  • Use the electric drill (Ø6mm) to break through the four knockout holes.

    Knockout Holes
  • Positioning the Main Controller Panel (A) at the desired ceiling location and hold it against the ceiling.

    Main Controller Panel (A)
  • Take a pencil and mark each screw hole on the ceiling.

    Screw Hole
  • Now align and mount the Main Controller Panel (A) back to the Ceiling Plate.

  • Make sure the wires have passed through the Ceiling Plate and that the Main Controller Panel (A) sits secure and flat on the plate.

  • Secure the Ceiling Plate with the Wing Nuts (C).

    Wing Nuts (C) 1
    Wing Nuts (C) 2
  • Using the provided anchors and screws, mount your Main Controller Panel in place with the four knockout holes in the corner of each panel.

  • To mount the panel in place you can use:

    First Option: Drywall Anchors (F)

    Screw in the four Drywall Anchors (F) to the four spots you marked prior

    Second Option: Plaster Anchors (G)

    Drill a hole of 6mm (OD) then drive the Mounting Screw (E) into the Plaster Anchor (G)

    aviso

    Different mounting hardware will be required for installation on structural wood, concrete, and porous masonry surfaces. The correct items are widely available at hardware and home improvement stores.

2

Connect Electrical Wiring

Connect Electrical Wiring
  • Insert the ceiling wires into any of the slots on the terminal block. Use your finger or a screwdriver to push the clamps when inserting. Make sure the wires are secured in place such that it cannot be pulled out.

    Black = Live wire

    White = Neutral wire

  • Remove any terminal block knockout holes as needed.

Setting up the Expansion Panels

1

Mount Expansion Panels

Mount Expansion Panels
  • Add an Expansion Panel (B) and position it next to the Main Controller Panel (A).

  • Remove the knockout holes on all four corners, hold it against the ceiling and mark each screw holes with a pencil.

  • For each Expansion Panel (B), repeat the steps for mounting found here.

    First Option: Drywall Anchors (F)

    Screw in the four Drywall Anchors (F) to the four spots you marked prior

    Second Option: Plaster Anchors (G)

    Drill a hole of 6mm (OD) then drive the Mounting Screw (E) into the Plaster Anchor (G)

2

Connect the Wires

Connect the Wires
  • Thread the wires through the Grommet Cover to connect the Communication Linker (J) from the Main Controller Panel (A) to the Expansion Panel (B) through the linker slot.

  • Attach the Power Wires (K) to the socket closest to the next expansion panel. Follow the embossed line and wire through the opening to the next panel where the Communication Linker is attached.

  • Repeat this step for additional panels you add.

Power On Your Skylight

Power On Your Skylight
  • Turn the circuit power back on and turn the light switch on to power the panels.

    Power the Panels 1
  • Your new Skylight panels will now power on at low brightness. Once the boot-up process is complete, the panels will gradually shift to full brightness to indicate that the system is ready for pairing.

    Power the Panels 2
  • Reinstall the L Shape Cover.

Hello, Traveller! Hallo Reisender! Bonjour voyageur ! Halo, Wisatawan! Ciao, Viaggiatore! ようこそ、旅行者の皆様。 안녕하세요, 여행자 여러분들! สวัสดีนักเดินทาง! Xin chào, khách du lịch! 您好,喜愛旅行的各位!

We think there might be a better match for your location and language :) You can set these below for local prices and the fastest delivery. Wir glauben, dass es für Ihren Standort und Ihre Sprache eine bessere Übereinstimmung geben könnte :) Diese können diese unten einstellen, um lokale Preise und die schnellste Lieferung zu erhalten. Nous pensons qu’il pourrait y avoir de meilleurs résultats correspondant à votre emplacement et à votre langue :) Vous pouvez les préciser ci-dessous pour avoir une idée sur les prix locaux et les meilleurs délais de livraison. Kami pikir mungkin ada kecocokan yang lebih baik untuk lokasi dan bahasa Anda :) Anda dapat mengaturnya di bawah ini untuk harga lokal dan pengiriman tercepat. Potrebbe esserci una corrispondenza migliore per la località e la lingua da te scelta :) Impostale qui sotto per i prezzi a livello locale e una consegna più rapida. お客様の地域や言語によりピッタリのウェブページをお選びください :)以下から、現地の価格や最短の配信をご設定いただけます。 귀하의 위치와 언어에 더 적합한 매치가 있으리라 생각합니다. 지역 금액 및 가장 빠른 배송을 위해 귀하는 위치와 언어를 아래에서 설정할 수 있습니다. เราพบว่ามีตัวเลือกที่ดีกว่าสำหรับที่อยู่และภาษาของคุณ คุณสามารถตั้งค่าข้อมูลเหล่านี้ด้านล่างสำหรับราคาท้องถิ่นและเวลาจัดส่งที่เร็วที่สุด Chúng tôi nghĩ rằng có thể có sự phù hợp tốt hơn cho vị trí và ngôn ngữ của bạn :) Bạn có thể đặt những điều này bên dưới để có giá địa phương và giao hàng nhanh nhất. 使用自己的位置和語言肯定更順手吧:)您可以在下方設定這些選項,並取得當地價格與最快的交付。

de descuento
El código de descuento se aplicará* al momento del pago.
*en todos los productos elegibles
Agrega un enlace de video
Obtener ayuda

Obtener ayuda

Te damos la bienvenida al chat de Nanoleaf

¡Te damos la bienvenida! Nuestro equipo está disponible para responder a través del chat en vivo en cualquier momento (las 24 horas, los 7 días de la semana). Normalmente, responderemos tus preguntas en menos de 5 minutos. Mientras tanto, puedes revisar nuestra sección de Ayuda para ver respuestas a preguntas frecuentes y soluciones sencillas.

Nuestro chat permanecerá sin conexión por el momento mientras solucionamos problemas de migración del sistema y nos aseguramos de estar atendiendo el volumen actual de solicitudes. Volveremos a habilitar este canal cuando estemos seguros de que no haya problemas de migración. Gracias por su paciencia y comprensión. ¡Felices Fiestas para usted y su familia de parte de la familia Nanoleaf!

Algo salió mal. Por favor, inténtalo de nuevo.
¡Hola! Gracias por el mensaje, estás conversando con .
está escribiendo