Una API de red local diseñada para ampliar tu experiencia con el producto. Integra tu configuración con los dispositivos y los servicios de terceros y habilita un control más granular del hardware.
- Configuración del producto
- Problemas y soluciones
Light Panels User Manual
Coloca tus paneles
Prepara la superficie
The Nanoleaf Light Panels should only be installed indoors and on a flat surface that can support the weight of the panels. Clean your surface to be free of dust, moisture and oil.
Uso de la cinta de montaje
Use the included Mounting Tape to securely attach the panels. We recommend using 3 pieces of Mounting Tape for each panel.
Mount Your First Panel
Diseña un panel de tu espacio como el panel de inicio. Despega el otro lado de la cinta y presiona el panel firmemente contra la pared. Sostén cada esquina durante 30 segundos para que te asegures de que el panel se adhiera firmemente.
Make sure to leave end of the tape sticking out. This will allow you to safely remove them later from the wall.
Connecting the Controller
Connect your Controller into an available linker slot of the first panel. Plug the other end into a power source to ensure that your setup is on and properly connected as you continue to link your panels together.
Each standard 65W PSU supports up to 30 Light Panels (2W per panel).
Completa tu espacio
Continúa uniendo cada panel y asegúrate de que cada panel se ilumine mientras lo haces. Asegúrate de que los conectores estén completamente encajados en la ranura del conector; los paneles deben estar alineados de borde a borde.
Conexión del módulo Rhythm
The Rhythm Module is included with any purchase of the Nanoleaf Light Panels Smarter Kit. To connect the Rhythm, insert it into any available linker slot.
¿Estás usando auriculares, pero quieres ver cómo tus paneles reaccionan a la música? Utiliza un cable de audio de 3.5 mm y un divisor para conectar el ritmo a una fuente de audio. Los cables de audio y los divisores no vienen con ningún producto de Nanoleaf.
Need to Dismount Your Light Panels?
With one hand on the Light Panels, use your other hand to pull the ends of tape along the wall. Do not pull perpendicularly or at any other angle, otherwise, you may damage your wall. Continue removing the tape from each panel until they are all safely removed.