Choisir une devise
  • États-Unis
    Dollar américain
    USD (US$)
  • International
    Dollar de Hong Kong
    HKD (HK$)
  • Inde
    Roupie indienne
    INR (₹)
  • Indonésie
    Roupie indonésienne
    IDR (Rp)
  • Japon
    Yen japonais
    JPY (¥)
  • Corée du Sud
    Won coréen
    KRW (₩)
  • Malaisie
    Ringgit malaisien
    MYR (RM)
  • Philippines
    Peso philippin
    PHP (₱)
  • Singapour
    Dollar de Singapour
    SGD (S$)
  • Thaïlande
    Baht thaïlandais
    THB (฿)
  • Taïwan
    Dollar de Taïwan
    TWD (NT$)
  • Vietnam
    Dông vietnamien
    VND (₫)
Panier d’achats
Votre panier est vide
Sous-total
0
Points à gagner dans le panier :
+6190 pts
?
a été ajouté à votre panier.
retiré. a été ajouté à votre panier.
annuler

Manuel de l’utilisateur

Nanoleaf Essentials Smart Bulbs & Lightstrips

Bienvenue à
Smarter Living

Félicitations, vous êtes officiellement propriétaire des Nanoleaf Essentials.Merci de votre soutien, vous égayez notre journée comme Nanoleaf fait briller le monde !

Présentation du produit
Table des matières
Configuration du produit

La configuration de vos ampoules et Lightstrips Nanoleaf Essentials est rapide et facile, vous pouvez donc profiter d’une expérience d’éclairage intelligent de niveau supérieur en un rien de temps.

Installer vos Lightstrips

Planifier votre installation

Lorsque vous planifiez où installer les bandes lumineuses, assurez-vous de placer le contrôleur dans une zone facilement accessible.De plus, si vous choisissez de masquer le contrôleur, appariez votre Lightstrip à votre appareil avant de l’installer, car vous devrez accéder à l’arrière du contrôleur pendant le processus d’appariement si vous vous appariez avec NFC.

remarque :Chaque contrôleur Lightstrip peut alimenter jusqu’à 10 m de Lightstrips à pleine luminosité.Le prolonger davantage diminuera la luminosité maximale.

Couper une Lightstrip

If you need to cut the Lightstrip to make it shorter to fit your space, connect the male end of your Lightstrip to the Controller before making any adjustments. Cut your Lightstrip from the other end (female side). Make sure to do so along the indicated cut line to avoid damaging your strip.

NOTE: Once cut, the strip can not be connected back together, so ensure you’ve measured properly before cutting.

Préparation de votre surface

Clean your surface to be free of dust, moisture, and oil.

Fixation d’une Lightstrip

Fixez la bande au contrôleur et le contrôleur au bloc d’alimentation.Retirez le ruban rouge au dos de la Lightstrip et collez fermement la Lightstrip sur votre surface (5.1).Appuyez fermement sur la longueur de la bande pour assurer une forte adhérence (5.2).Branchez-les sur l’alimentation et il vous suffit de les apparier (5.3) !

Installer vos Lightstrips

Planifier votre installation

Lorsque vous planifiez où installer les bandes lumineuses, assurez-vous de placer le contrôleur dans une zone facilement accessible.De plus, si vous choisissez de masquer le contrôleur, appariez votre Lightstrip à votre appareil avant de l’installer, car vous devrez accéder à l’arrière du contrôleur pendant le processus d’appariement si vous vous appariez avec NFC.

remarque :Chaque contrôleur Lightstrip peut alimenter jusqu’à 10 m de Lightstrips à pleine luminosité.Le prolonger davantage diminuera la luminosité maximale.

Couper une Lightstrip

Si vous avez besoin de couper une Lightstrip pour la raccourcir afin de l’adapter à votre espace, connectez l’extrémité mâle de votre Lightstrip au contrôleur avant de faire des ajustements (4.1).Coupez votre Lightstrip à partir de l’autre extrémité (côté femelle).Assurez-vous de le faire le long de la ligne de coupe indiquée pour éviter d’endommager votre bande (4.2).REMARQUE :Une fois coupée, la bande ne peut plus être reliée ensemble, alors assurez-vous d’avoir pris les bonnes mesures avant de couper.

Préparation de votre surface

Nettoyez votre surface pour qu’elle soit exempte de poussière, d’humidité et d’huile.

Fixation d’une Lightstrip

Fixez la bande au contrôleur et le contrôleur au bloc d’alimentation.Retirez le ruban rouge au dos de la Lightstrip et collez fermement la Lightstrip sur votre surface (5.1).Appuyez fermement sur la longueur de la bande pour assurer une forte adhérence (5.2).Branchez-les sur l’alimentation et il vous suffit de les apparier (5.3) !

Before You Pair Your Essentials (Matter)

Your Nanoleaf Lightstrip can run on Bluetooth, just Thread or with Matter over Thread. Using your Lightstrip with Matter over Thread will allow you to experience our full set of features, and the benefits of Matter and Thread.

Unlock More with Matter and Thread

Bluetooth
Thread*
Matter over Thread**
Control with Nanoleaf App
16M+ Colours & Tunable Whites
Éclairage Circadien
Dynamic Colour Scenes
Brightness Control
Thread Benefits
(Increase Speed, Range, Reliability)
Screen Mirror
Application de bureau Nanoleaf
Smart Home Ecosystem Integration
Contrôle avec la voix
Horaires
Remote Access
(away from home)

*Requires a Thread border router

**Requires a Matter compatible smart home hub and Thread border router

We strongly recommend pairing your lights in the Nanoleaf App first, for the smoothest experience possible for getting access to Nanoleaf-exclusive features and firmware updates. From the Nanoleaf App you can then connect directly to your supported smart home ecosystems via Matter.

To run Matter over Thread, you’ll need:

  • 1.

    A Matter-compatible smart home hub (which might just be a software update away on any current hub you might have. Or if you’re starting from scratch, here are the full lists of devices from Apple, Google, Amazon Alexa, Samsung SmartThings)

  • 2.

    A Thread border router (which again might be hiding in a device you already own)


Some smart home hubs act as Thread border routers as well, so you won’t necessarily have to get two separate devices. Here are some Matter-compatible smart home hubs that double as Thread Border Routers:


Apple: Apple HomePod mini, Apple HomePod, Apple TV 4K (2nd generation and 3rd generation WiFi + Ethernet 128GB model)

Google: Nest Wifi Pro (Wi-Fi 6E), Nest Hub (2nd gen), Nest Hub Max (learn more)

Amazon: Support for Matter over Thread devices coming soon. See here for updates.

Samsung: SmartThings 2018 Hub (IM6001-V3P01) and Aeotec Smart Home Hub (learn more)

Pairing Your Essentials for iOS

Thread

If you have a compatible Thread border router set up in your home (like Apple HomePod mini), your Essentials Lightstrip will automatically begin using Thread with no additional steps required.

Processus d’appariement standard pour iOS

Pour assurer un processus d’appariement sans heurts, veuillez vous assurer que les éléments suivants sont prêts :

  • Nécessite 10+, activez Bluetooth

  • Found as a QR code and a 8 digit code on your Quick Start Guide/Welcome Card or on the back of the Controller.

1

Télécharger et ouvrir l’application Nanoleaf

You can find the official Nanoleaf App in the App Store. Make sure you have the latest version.

2

Appariement de vos Essentials

  • 2.1

    On the Dashboard, tap the pencil icon in the top right corner.

  • 2.2

    Tap “Add Device +”

  • 2.3

    Under Essentials, Select Essentials Lightstrip as your product.

  • 2.4

    The app will automatically open up the pairing window.

  • 2.5

    Follow the instructions on the screen to either:

    - Scan the QR code

    - Enter in the 8-digit pairing code found on the back of the Essentials Controller or Quick Start Guide/Welcome Card

    - Use NFC Tap, by tapping your phone to the back of the Controller

  • 2.6

    Your Nanoleaf Essentials Lightstrip should now be connected and ready to go.

Standard Pairing Process with iOS

Pairing with the Nanoleaf App

Pour assurer un processus d’appariement sans heurts, veuillez vous assurer que les éléments suivants sont prêts :

  • Requires iOS 13+, turn ON Bluetooth

  • Found on the back of the Lightstrip Controller and Welcome Card/Quick Start Guide.

1

Télécharger et ouvrir l’application Nanoleaf

You can find the official Nanoleaf App in the App Store. Make sure you have the latest version.

2

Pair Your Lightstrip

  • 2.1

    On the Dashboard, tap the pencil icon in the top right corner.

  • 2.2

    Tap “Add Device +”.

  • 2.3

    Select the Essentials tab and then “Start Scan” on the model being paired.

  • 2.4

    Tap the Pair button on the device you want to pair with.

    - The magnifying glass can be used to identify the device by causing it to flash. This is disabled 15 minutes after the light is powered up for security.

    - An alternative method for identifying the device is by looking at the three characters at the end of the device name, which can be matched up with the characters next to “ID:” printed on your the back of your Lightstrip Controller near the Matter code, as well as on the Welcome Card/Quick Start Guide.

  • 2.5

    Scan the Matter QR code on the Welcome Card/Quick Start Guide. Alternatively, select Pair Manually, input the 11 digit pairing code, and tap Next.

  • 2.6

    The Nanoleaf app will pair with the device and ask you for permission to access your network to check for available Thread networks, and then provision the device to Thread if one is available.

  • 2.7

    Name your device and assign it to a room.

  • 2.8

    If a smart home hub and compatible Thread border router are present in the home and detected by the Nanoleaf app, you will be provided with the option to connect your light to Matter. Otherwise, you will be taken back to the Dashboard.

  • 2.9

    Continue with the following steps if you’re presented with the “Add To An Ecosystem” screen:

    - Tap “Connect”.

    - On iOS, you will automatically be prompted to add the light to Apple Home.

    - Alternatively, you can do this at a later date by accessing your Lightstrip settings within the Nanoleaf App and tapping Connections.

  • 2.10

    Pairing must be initiated within 15 minutes of the light being powered on. Disconnect and reconnect your lights from power to re-enable Matter pairing (this only works when the device has not already been paired via Matter).

« Comment une configuration peut-elle être contrôlée par plusieurs utilisateurs iOS ? »

On y arrive avec l’application Apple Home et l’application Nanoleaf.

Utilisateur principal

  • 1.1

    Ouvrez l’application Nanoleaf.

  • 1.2

    Sélectionnez l’onglet PLUS.   · · ·

  • 1.3

    Sélectionnez UTILISATEURS.

  • 1.4

    Invitez l’utilisateur secondaire à travers son compte iCloud.

Utilisateur secondaire

  • 1.1

    Une notification apparaîtra pour vous permettre d’accepter.

  • 1.2

    Dans l’application Home, sélectionnez l’icône d’accueil en haut à gauche.

  • 1.3

    Sélectionnez CONFIGURATIONS DE MAISON, une liste de maisons apparaîtra.

  • 1.4

    Acceptez la maison qui a été partagée avec vous.Cela vous donnera le contrôle de tous les appareils se trouvant dans une seule et même maison. Remarque : Les utilisateurs secondaires ne peuvent pas ajouter ni supprimer d’appareils.

Pairing Your Essentials for Android

Processus d’appariement standard pour Android

To ensure a smooth pairing process, please make sure you have the appropriate things ready.

  • Requires Android 9.0+, turn ON Bluetooth

  • Found as a QR code and a 8 digit code on your Quick Start Guide/Welcome Card or on the back of the Controller.

1

Télécharger et ouvrir l’application Nanoleaf

You can find the official Nanoleaf App in the Google Play Store. Make sure you have the latest version.

2

Appariement de vos Essentials

Assurez-vous que vos paramètres de localisation sont activés sur votre appareil.

  • 2.1

    On the Dashboard, tap the pencil icon in the top right corner.

  • 2.2

    Tap “Add Device +”

  • 2.3

    Under Essentials, Select Essentials Lightstrip as your product.

  • 2.4

    The app will automatically scan for devices.

  • 2.5

    Follow the instructions on the screen to either:

    - Scan the QR code

    - Enter in the 8-digit pairing code found on the back of the Essentials Controller or Quick Start Guide/Welcome Card

    - Use NFC Tap, by holding the top of your mobile device over the back of the Controller

  • 2.6

    Your Nanoleaf Essentials Lightstrip should now be connected and ready to go.

Standard Pairing Process with Android

Pairing with the Nanoleaf app

Pour assurer un processus d’appariement sans heurts, veuillez vous assurer que les éléments suivants sont prêts :

  • Requires Android 9.0+, turn ON Bluetooth. Ensure your location settings are enabled on your device.

  • Found on the back of the Lightstrip Controller and Welcome Card/Quick Start Guide.

1

Télécharger et ouvrir l’application Nanoleaf

You can find the official Nanoleaf App in the Google Play Store. Make sure you have the latest version.

2

Pair Your Lightstrip

  • 2.1

    On the Dashboard, tap the pencil icon in the top right corner.

  • 2.2

    Tap “Add Device +”.

  • 2.3

    Select the Essentials tab and then “Start Scan” on the model being paired.

  • 2.4

    Tap the Pair button on the device you want to pair with.

    - The magnifying glass can be used to identify the device by causing it to flash. This is disabled 15 minutes after the light is powered up for security.

    - An alternative method for identifying the device is by looking at the three characters at the end of the device name, which can be matched up with the characters next to “ID:” printed on the back of your Lightstrip Controller near the Matter code, as well as on the Welcome Card/Quick Start Guide.

  • 2.5

    Scan the Matter QR code on the Welcome Card/Quick Start Guide.

    - Alternatively, use NFC Tap by tapping the back of your mobile device to the Nanoleaf logo on the Controller

    - Or select Pair Manually, input the 11 digit pairing code, and tap Next.

  • 2.6

    The Nanoleaf app will pair with the device and ask you for permission to access your network to check for available Thread networks, and then provision the device to Thread if one is available.

  • 2.7

    Name your device and assign it to a room.

  • 2.8

    If a smart home hub and compatible Thread border router are present in the home and detected by the Nanoleaf app, you will be provided with the option to connect your light to Matter. Otherwise, you will be taken back to the Dashboard.

  • 2.9

    Continue with the following steps if you’re presented with the “Add To An Ecosystem” screen:

    - Tap the Connect button.

    - On Android, you will be shown a menu with the following:

    a. Options for supported apps for direct pairing (select one and you’ll be directed through the setup flow in that app)

    b. “Use pairing code” - select this if the app you want to pair with is on the same phone/tablet but doesn’t show up in the list, copy the code, and paste the code into the app you want to pair with (follow the more specific steps in the links below if you’re having trouble).

    c. “Use QR code” - select this if the app you want to pair with is on a different phone/tablet, then open the app on your other device and scan the new QR code (follow the more specific steps in the links below if you’re having trouble).

    - Alternatively, you can do this at a later date by accessing your Lightstrip settings within the Nanoleaf App and tapping Connections.

  • 2.10

    Pairing must be initiated within 15 minutes of the light being powered on. Disconnect and reconnect your lights from power to re-enable Matter pairing (this only works when the device has not already been paired via Matter).

Pairing with Smart Home Ecosystems

We recommend pairing first with the Nanoleaf App to ensure the smoothest experience. However, if you wish to pair directly with one of the ecosystems, ensure the following requirements are satisfied:

  • 1.

    A Matter-compatible smart home hub for that ecosystem is already paired.

  • 2.

    Compatible Thread border router is already paired (may be the same device as your smart home hub)

  • 3.

    This is the first ecosystem you’re pairing your Essentials to. If you’ve already paired with one ecosystem via Matter and want to share with a second ecosystem, follow the steps here.

  • 4.

    Pairing must be initiated within 15 minutes of the light being powered on. Disconnect and reconnect your lights from power to re-enable Matter pairing (this only works when the device has not already been paired via Matter).

Then, proceed with the following steps in the links below for your desired ecosystem:


Apple Home

Pairing with Apple Home is only available using an iOS device.

Pair and manage your Matter accessories

Google Home

Pairing Matter devices with Google Home is currently only available on Android, but Matter devices paired on Android can be controlled by the Google Home app on iOS today if logged into the same account on both phones/tablets. Pairing support for Google Home on iOS is expected to launch in April.

Manage Matter-enabled devices in the Google Home app - Google Nest Help

Amazon Alexa

Support for Matter over Thread devices is expected to come soon. See here for updates.

Sharing Matter Devices between Ecosystem

One of the promising features of Matter is Multi-Admin which lets you share your Matter Bulb between ecosystems. Using this feature, it can be controlled by any or all of the ecosystems (ie. Apple Home, Google Home, Amazon Alexa, and Samsung SmartThings) simultaneously!

Instructions

Garantie

Register your warranty and get the very best from your Nanoleafs.

Recherchez dans les paramètres de l’application de votre produit (Tableau de bord > Appareil > paramètres > répertorié sous à propos de).
Nous souhaitons nous assurer que vous tirerez le meilleur parti de votre installation Nanoleaf. Recevez des conseils sur la façon d’utiliser certaines fonctionnalités intéressantes, obtenez des offres exclusives ainsi que les nouveautés. Vous n’en voulez pas ? Vous pouvez vous désabonner à tout moment avec le lien en pied de page de tout e-mail =)
Toutes les communications que nous avons avec vous sont traitées conformément à la politique de confidentialité de Nanoleaf, tout comme le traitement de tout renseignement personnel identifiable fourni. En la soumettant, vous enregistrerez votre garantie (qui vous sera renvoyée par e-mail) et vous nous autorisez à vous contacter concernant les problèmes liés à la garantie. Vous ne recevrez aucune autre communication sauf si vous avez accepté de vous abonner séparément.

Merci d’avoir enregistré votre garantie !

Contrôle de vos Essentials

Contrôleur

  • Le contrôleur est livré avec sept couleurs par défaut.Appuyez deux fois pour faire défiler les blancs froids et chauds.Appuyez longuement pour une roue chromatique.

  • Appuyez longuement pour une luminosité à 100 %.

  • Appuyez longuement pour une luminosité à 5 %.

Application Nanoleaf

Turn your lighting on and off, control brightness, group lights by home and by room, create and use Scenes, and much more.

Tableau de bord

Control your rooms and devices. Choose an existing Colour or create your own.

En savoir plus

Trouvez et téléchargez de nouvelles scènes créées par la communauté Nanoleaf.

Explorer

Find helpful information including tutorials, new device features, integrations, and learn about other Nanoleaf products, etc.

Explore Resources

Find helpful information including tutorials, new device features, integrations, and learn about other Nanoleaf products, etc.

Horaires

Automate your Lightstrip to turn on or off. Currently, scheduling can be done through HomeKit with a Home Hub available (over Bluetooth or Thread) or through Google Home.

Horaires

Automate your Lightstrip to turn on or off through a smart home ecosystem app.

Contrôle avec la voix

You can easily control your Essentials by voice in a few different ways. In the Nanoleaf App, make sure to name your Lightstrip with something simple.

  • « Allume/éteins [nom de l’appareil]. »

    « Règle la luminosité de [nom de l’appareil] sur 10 %. »

    « Augmente/tamise la luminosité. »

    « Augmente/tamise la luminosité à [%]. »

    « Règle [nom de la scène]. »

    « Règle [nom de l’appareil] sur [nom de la scène] »

    « Règle [nom de l’appareil] sur [couleur]. »

  • « Allume [nom de l’appareil ou nom de la scène]. »

    « Allume/éteins les lumières dans [nom de la pièce]. »

    « Allume/éteins toutes mes lumières. »

    « Éteins [nom de l’appareil]. »

    « Augmente/tamise la luminosité de [nom de l’appareil]. »

    « Augmente/tamise la luminosité dans [nom de la pièce]. »

    « Augmente/tamise la luminosité de toutes mes lumières. »

    « Règle [nom de l’appareil] sur [%]. »

    « Règle [nom de l’appareil] sur [couleur]. »

API ouverte Nanoleaf

Une API de réseau local conçue pour étendre votre expérience produit. Intégrez votre configuration à des appareils et des services tiers et activez un contrôle plus granulaire du matériel.

CONNECTEZ-VOUS
PROBLÈMES ET SOLUTIONS

Réinitialiser les options

Si vous rencontrez des problèmes avec votre Lightstrip Essentials, essayez ces étapes :

A

Redémarrer

Éteignez/rallumez vos lumières en les débranchant de l’alimentation, puis en les rebranchant.

B

Bluetooth

Essayez de désactiver et de réactiver votre Bluetooth, de redémarrer l’application que vous utilisez pour contrôler vos lumières ou de redémarrer votre appareil.

C

Vérifier un interrupteur

Assurez-vous que vos lumières n’ont pas été éteintes par un interrupteur physique, comme sur une barre d’alimentation, car cela les mettrait hors tension et sans réaction.

D

Effectuer une réinitialisation

Cela supprimera vos informations d’appariement et de réseau. Du coup, une fois la réinitialisation effectuée, vous devrez apparier de nouveau.Avant d’effectuer cette réinitialisation, supprimez votre Lightstrip Essentials de votre appareil.


Pour effectuer une réinitialisation par défaut sur votre Lightstrip Essentials, maintenez les boutons d’alimentation et d’augmentation de la luminosité (+) du contrôleur pendant 5 secondes.Ces boutons doivent être enfoncés simultanément, sinon cela ne fonctionnera pas.Si la réinitialisation réussit, la Lightstrip clignotera trois fois en blanc, puis elle sera prête à être de nouveau appariée.


Si vous avez effectué toutes ces étapes et que votre problème persiste, veuillez contacter notre équipe d’assistance pour obtenir de l’aide.

Reach Out
Hello, Traveller! Hallo Reisender! Bonjour voyageur ! Halo, Wisatawan! Ciao, Viaggiatore! ようこそ、旅行者の皆様。 안녕하세요, 여행자 여러분들! สวัสดีนักเดินทาง! Xin chào, khách du lịch! 您好,喜愛旅行的各位!

We think there might be a better match for your location and language :) You can set these below for local prices and the fastest delivery. Wir glauben, dass es für Ihren Standort und Ihre Sprache eine bessere Übereinstimmung geben könnte :) Diese können diese unten einstellen, um lokale Preise und die schnellste Lieferung zu erhalten. Nous pensons qu’il pourrait y avoir de meilleurs résultats correspondant à votre emplacement et à votre langue :) Vous pouvez les préciser ci-dessous pour avoir une idée sur les prix locaux et les meilleurs délais de livraison. Kami pikir mungkin ada kecocokan yang lebih baik untuk lokasi dan bahasa Anda :) Anda dapat mengaturnya di bawah ini untuk harga lokal dan pengiriman tercepat. Potrebbe esserci una corrispondenza migliore per la località e la lingua da te scelta :) Impostale qui sotto per i prezzi a livello locale e una consegna più rapida. お客様の地域や言語によりピッタリのウェブページをお選びください :)以下から、現地の価格や最短の配信をご設定いただけます。 귀하의 위치와 언어에 더 적합한 매치가 있으리라 생각합니다. 지역 금액 및 가장 빠른 배송을 위해 귀하는 위치와 언어를 아래에서 설정할 수 있습니다. เราพบว่ามีตัวเลือกที่ดีกว่าสำหรับที่อยู่และภาษาของคุณ คุณสามารถตั้งค่าข้อมูลเหล่านี้ด้านล่างสำหรับราคาท้องถิ่นและเวลาจัดส่งที่เร็วที่สุด Chúng tôi nghĩ rằng có thể có sự phù hợp tốt hơn cho vị trí và ngôn ngữ của bạn :) Bạn có thể đặt những điều này bên dưới để có giá địa phương và giao hàng nhanh nhất. 使用自己的位置和語言肯定更順手吧:)您可以在下方設定這些選項,並取得當地價格與最快的交付。

éteint
Le code de réduction sera appliqué* au moment du paiement.
* pour tous les produits admissibles
Veuillez ajouter un lien vidéo
Obtenir de l’aide

Obtenir de l’aide

Bienvenue sur le chat de Nanoleaf

Bienvenue ! Notre équipe est accessible par chat en direct 24 heures sur 24, 7 jours sur 7 et répond normalement en l’espace de 5 minutes. En attendant, vous pouvez également consulter notre Assistance pour trouver des réponses aux questions les plus courantes et des solutions simples !

Veuillez remplir le champ de saisie suivant.
Une erreur s’est produite, veuillez réessayer.
Bonjour ! Merci de nous avoir contactés, vous êtes en contact avec .
est en train de taper