이 웹사이트는 귀하의 경험을 개인화하고 웹 트래픽 데이터를 분석하며 성능을 최적화하기 위해 자사 및 타사 쿠키를 사용합니다. Nanoleaf는 귀하의 데이터를 타사에 판매하지 않습니다. 개인정보 보호 정책.
PC 스크린 미러 라이트 스트립
설치
- Start with the end of the Lightstrip connected to the Controller. Peel off the tape and begin to adhere the Lightstrip to the back of your monitor, ensuring it is at least 2" away from the edge.
- Continue working your way around your monitor, using the cardboard Guideline to help with corner bends.
- Press firmly along the entire length of the Lightstrip to secure it in place.
- If excess length remains, cut the remaining loose end carefully along the indicated cut lines, avoiding the LED lights.참고
Once cut, the strip can not be connected back together. Your Lightstrip should now be securely attached to the back of your monitor.
- Connect the USB-C wire into the Controller, and plug into a computer USB-C port. The Lightstrip will light up once it’s connected to power..