API เครือข่ายในท้องที่นั้นออกแบบมาเพื่อขยายประสบการณ์ผลิตภัณฑ์ของคุณ ผสานแผ่นไฟเข้ากับอุปกรณ์และบริการของบริษัทอื่น ๆ ไปจนถึงเปิดให้สามารถควบคุมฮาร์ดแวร์ได้ละเอียดยิ่งขึ้น
- การติดตั้งและตั้งค่าผลิตภัณฑ์
- ปัญหาและการแก้ไข
Light Panels User Manual
ติดตั้งแผ่นไฟของคุณ
เตรียมพื้นผิว
The Nanoleaf Light Panels should only be installed indoors and on a flat surface that can support the weight of the panels. Clean your surface to be free of dust, moisture and oil.
ใช้เทปกาวติดผนัง
Use the included Mounting Tape to securely attach the panels. We recommend using 3 pieces of Mounting Tape for each panel.
Mount Your First Panel
กำหนดแผ่นไฟในดีไซน์ของคุณที่จะเป็นแผ่นเริ่มต้น ลอกผิวอีกด้านของเทปแล้วติดแผ่นไฟกับผนังให้แน่น กดมุมแต่ละมุมเอาไว้ 30 วินาทีเพื่อให้แน่ใจว่าแผ่นไฟติดกับพื้นผิวแน่นสนิทดี
Make sure to leave end of the tape sticking out. This will allow you to safely remove them later from the wall.
Connecting the Controller
Connect your Controller into an available linker slot of the first panel. Plug the other end into a power source to ensure that your setup is on and properly connected as you continue to link your panels together.
Each standard 65W PSU supports up to 30 Light Panels (2W per panel).
ติดตั้งจนเสร็จ
เชื่อมต่อแผ่นไฟแต่ละแผ่นเข้าด้วยกันและตรวจสอบว่าไฟแต่ละแผ่นสว่างขึ้นเมื่อคุณต่อเข้าด้วยกัน ตรวจสอบว่าสายเชื่อมต่อเชื่อมเข้าด้วยกันสนิทดีในช่องเชื่อมต่อตัวเชื่อม ขอบของแผ่นไฟควรเรียงต่อกันได้สนิท
เชื่อมต่อโมดูล Rhythm
The Rhythm Module is included with any purchase of the Nanoleaf Light Panels Smarter Kit. To connect the Rhythm, insert it into any available linker slot.
ใช้เฮดโฟนแต่ยังต้องการเห็นแผ่นไฟของคุณตอบสนองต่อเสียงเพลงใช่หรือไม่ ใช้สาย Audio ขนาด 3.5 มม. และตัวแยกสัญญาณเพื่อเชื่อมต่อโมดูล Rhythm เข้ากับแหล่งกำเนิดเสียง สาย Audio และตัวแยกสัญญาณไม่ได้ให้มาพร้อมกับผลิตภัณฑ์ของ Nanoleaf
Need to Dismount Your Light Panels?
With one hand on the Light Panels, use your other hand to pull the ends of tape along the wall. Do not pull perpendicularly or at any other angle, otherwise, you may damage your wall. Continue removing the tape from each panel until they are all safely removed.