此網站使用第一手及第三方 Cookie 以為您提供個人專屬體驗、分析網頁流量數據,以及促使網站效能達至最佳化。 我們不會向第三方出售您的數據。 私隱政策。
PC 屏幕镜面灯带
安裝
- Start with the end of the Lightstrip connected to the Controller. Peel off the tape and begin to adhere the Lightstrip to the back of your monitor, ensuring it is at least 2" away from the edge.
- Continue working your way around your monitor, using the cardboard Guideline to help with corner bends.
- Press firmly along the entire length of the Lightstrip to secure it in place.
- If excess length remains, cut the remaining loose end carefully along the indicated cut lines, avoiding the LED lights.注意
Once cut, the strip can not be connected back together. Your Lightstrip should now be securely attached to the back of your monitor.
- Connect the USB-C wire into the Controller, and plug into a computer USB-C port. The Lightstrip will light up once it’s connected to power..