Sense+ Smart Switch User Manual

It does not! The Sense+ Wireless Switch has a magnetic mounting plate that can be mounted onto a wall with adhesive tape (included) or screws. No hardwiring required!

Sense+無線開關配備可更換的CR2477電池，電池壽命為1年以上。

The Sense+ Smart Wireless Switch is compatible with most Nanoleaf Smart Lights*, with the exception of Original Nanoleaf Light Panels, Nanoleaf Canvas, and Smarter Partner products.

You can also connect some non-Nanoleaf devices to the Switch via Matter Early Access depending on the device and its compatibility with Matter and your smart home ecosystem.

*Support for Nanoleaf 4D is coming soon.

By default, each Switch can only be paired/configured with a single mobile device.

You can disable Sense+ (motion/daylight sensors) directly within the Nanoleaf App.

Sense+ is designed to automate turning on and off your lights. If Sense+ is turned ON, your lights will turn on/off automatically based on your motion/daylight sensor settings.

Yes! You can pause Sense+ directly within the Nanoleaf App, or via your physical switch by Long Pressing (2s) the ON or OFF button.

This is ideal for situations such as:

• Keeping your lights OFF while you watch a movie
• Keeping your lights ON while you sit to work or read
• Keeping your lights ON while you take a super long relaxing shower

You can resume them by pressing (single press) the ON or OFF buttons once

The motion sensor has a field of view of 120° and a range of 15ft. It cannot sense through walls or objects. To increase the coverage of Sense+ motion sensing in your home, you can add additional Switches to the same Control Group, or to a different Control Group in the same room.

It uses a proprietary wireless control technology (protocol) called Nanoleaf Litewave. It allows the switch to connect to all your Nanoleaf lights (regardless of whether those products are running on Thread, Bluetooth or Wi-Fi) in a more robust and reliable way, for seamless, instantaneous control.

NOTE: The Sense+ Wireless Switch does require Bluetooth for the initial pairing with the Nanoleaf App.