此網站使用第一手及第三方 Cookie 以為您提供個人專屬體驗、分析網頁流量數據,以及促使網站效能達至最佳化。 我們不會向第三方出售您的數據。 私隱政策。
EXPO Display Case User Manual
Large Installations (8+ Cases)
Each standard 42W Power Supply Unit (PSU) supports up to 8 Cases. A 75W PSU can power up to 14 Cases. 75W PSUs and cannot be used in the same layout as a 42W PSU.
啟動電源分配模式
If you have more than 8 Cases and/or multiple Controllers in your Display Case setup, you will need to use a 75W PSU (purchased separately and cannot be used in the same layout as a 42W PSU). Activating Power Diagnostic Mode will give you tips on where you can place your Power Supplies for optimal performance.
You can Activate Power Diagnostic Mode via the Nanoleaf App by following the instructions below.
開啟 Nanoleaf App。
- 開啟更多功能表。
- 選擇「設定」>「警告」>「限定電力」
- 開啟側邊功能表
- 選擇「設定」>「警告」>「限定電力」
彩色編碼地圖
A colour-coded map of your EXPO Cases will appear in the App. The map will automatically update as you connect or move the Power Supply Unit within your setup.
分配供電
紅色:供電需要移動。
綠色:供電放置地點良好。
藍色:遺失的供電數和那些供電的最佳位置。
White: Alternative place to add a power supply. The brighter the display case, the better the placement.