本地網絡 API 設計為拓展您的產品體驗。透過第三方裝置和服務整合您的安裝,然後啟用硬件上更多的精緻控制。
Bulbs User Manual
Standard Pairing Process with Android Pairing for Android
與 Nanoleaf App 配對
為確保流暢的配對程序,請務必準備好下列項目:
需要 Android 9 以上,開啟藍牙。 確保裝置上已經啟用您的位置設定。
詳見燈泡和迎新卡/快速入門指南。
下載並開啟 Nanoleaf App
You can find the official Nanoleaf Smarter Series App in the Google Play Store. Make sure you have the latest version.
Pair Your Bulbs
確保裝置上已經啟用您的位置設定。
- 在儀錶板上,輕觸右上角的鉛筆圖示。
- 輕觸「Add Device +」(添加裝置 +)
- 選擇 Essentials 標籤,然後在正在配對的型號上選擇「Start Scan」(開始掃描)。
- Tap the Pair button on the device you want to pair with.Option A
The magnifying glass can be used to identify the device by causing it to flash. This is disabled 15 minutes after the light is powered up for security.
Option BAn alternative method for identifying the device is by looking at the three characters at the end of the device name, which can be matched up with the characters next to “ID:” printed on your light near the Matter code, as well as on the Welcome Card/Quick Start Guide.
- 掃描燈泡及迎新卡/快速入門指南上的 Matter 二維碼。 或者,手動選擇 Pair(配對),輸入 11 位數的配對代碼,然後輕觸 Next(下一步)。
- Nanoleaf app 將與裝置配對,並要求您允許存取網絡以檢查可用的 Thread 網絡,然後將裝置提供給 Thread(如有)。
- 為您的裝置命名,並將其指派至房間。
- 若家中存在智能家居中心和兼容的 Thread 邊界路由器,並由 Nanoleaf app 偵測到,將向您提供把燈具連接到 Matter 的選項。 否則,您將回到儀錶板。
- Continue with the following steps if you’re presented with the “Add To An Ecosystem” screen:Option A
Tap “Connect”
Option B在 Android 上,將向您顯示一個功能表,其中包含以下內容:
- Options for supported apps for direct pairing (select one and you’ll be directed through the setup flow in that app)
- “Use pairing code” - select this if the app you want to pair with is on the same phone/tablet but doesn’t show up in the list, copy the code, and paste the code into the app you want to pair with (follow the more specific steps in the links below if you’re having trouble).
- “Use QR code” - select this if the app you want to pair with is on a different phone/tablet, then open the app on your other device and scan the new QR code (follow the more specific steps in the links below if you’re having trouble).
Option CAlternatively, you can do this at a later date by accessing your Bulb settings within the Nanoleaf App and tapping Connections.
- 必須在燈具通電後 15 內開始配對。 將燈具的電源斷開然後再重新連接,以重新啟用 Matter 配對(這僅適用於裝置尚未透過 Matter 配對時)。
- 在儀錶板上,輕觸右上角的鉛筆圖示。
- 輕觸「Add Device +」(添加裝置 +)
- 在 Essentials 下,選擇 Essentials A19 作為您的產品。
- 該應用程式將自動開啟配對視窗。
- Follow the instructions on the screen to either:Option A
Scan the QR code
Option BEnter in the 8-digit pairing code found on your Elements Power Supply Unit, Controller, or Quick Start Guide/Welcome Card
- Your Nanoleaf Bulbs should now be connected and ready to go.