本地網絡 API 設計為拓展您的產品體驗。透過第三方裝置和服務整合您的安裝，然後啟用硬件上更多的精緻控制。
Elements User Manual
Large Installations (22+ Panels)
Each standard 42W PSU supports up to 22 Elements panels (2W per panel). Each Controller supports up to 80 panels. Adjust Your Power Supplies for Optimal Performance.
1
啟動電源分配模式
If you have more than 22 panels and/or multiple Controllers in your Elements setup, you should try to distribute Power Supplies across your layout evenly. Activating Power Diagnostic Mode will give you tips on where you can place your Power Supplies for optimal performance.
On your Controller, hold the Dim (–) and Brighten (+) buttons down together for 5 seconds.
2
開啟 Nanoleaf App。
For iOS Devices
- Open the MORE menu.
- Select SETTINGS > WARNINGS > Power Limited
For Android Devices
- Open the side menu.
- Select SETTINGS > WARNINGS > Power Limited
3
Colour-Coded Map
A colour-coded map of your panels will appear in the App. The map will automatically update as you connect or move Power Supply Units within your setup.
4
分配供電
Green: Connected Power Supply.
Blue: Add more Power Supplies. Connect extra power supplies to these panels.
White: Optional places to connect. If unable to do the above, add Power Supplies to the brightest panels.
42W: One (1) 42W Power Supply Unit comes with any Nanoleaf Elements Starter Kit.
75W: For optimal performance, do not use both 42W and 75W Power Supplies in the same Nanoleaf setup.
Do you have enough Power Supply Unit (PSUs) for your layout?
Each standard 42W PSU supports up to 21 Elements (2W per panel). Each Controller supports up to 80 Elements. The Controller and PSU can be connected to any panel.
需要更多電源嗎？
立即購買
