This website uses first and third party cookies to personalize your experience, analyze web traffic data, and optimize performance. We never sell your data to third parties. Privacy Policy.
Lines User Manual
Common Solutions
“I moved or changed my Wi-Fi network.”
This will allow you to connect your Lines to a new Wi-FI network.
- Plug your Lines in to a power source.
- With the Power and the Brighten buttons on the Controller, press and alternate between them 5 times (10 presses in total).
- The Power button LED will become solid white.
“My Lines are paired but unreachable.”
On your phone, toggle the Wi-Fi off, then on again.
Unplug your Lines from power, then plug it back in.
Unplug your Router from power, then plug it back in.
“I am not able to pair my Lines.”
- Are you connected to a 2.4 GHz network? 5 GHz networks are not supported.
- Ensure multicast, IGMP, UPnP (if available) are enabled on your router settings.
“I don’t see my Lines in the App for setup.”
Plug your PSU into power. The Power button on the Processor will light up after 1 minute.
If your Status LED is Solid White, means your Lines are ready to connect to your network.
- Make sure your mobile device Wi-Fi is on.
- Move your mobile device closer to your Lines.
- Toggle the Wi-Fi on your mobile device off, then on.
If your Status LED is Flashing, means Your Wi-Fi is configured, but the Lines cannot connect to the target network.
- Power Cycle your router (unplug your router from power, then plug it back in).
- If your Lines are paired on the Nanoleaf App, delete the device and re-pair them with the Standard Pairing Process.
If your Status LED is Unlit, means Your Wi-Fi is configured and connected to your router.
- Make sure your mobile device is on the same network.
- Toggle the Wi-Fi on your mobile device off, then on.