Items in your box may differ slightly based on pack size, but you can use this image to identify the components that we may refer to in our set up instructions.
Light String 5m / 16.4ft
Long Cable Cover
Short Cable Cover
Extension Cable 5m / 16.4ft
Extension Cable 3m / 9.84ft
Extension Cable 1.2m / 3.94ft
Female Splicer
Male Splicer
Power Supply Unit
Controller
Spare Puck Mount
Spare 3M Tape
Cable Clip
Cable Cover Clip
Counter Sunk Screw
Button Head Screw
Controller Mount
H2 Drill Bit
Installation Tool
Waterproof End Cap
Before you mount your lights, follow these steps to ensure that they work.
Step 1: Test the String Lights
Connect all string light segments together and plug the lights into an outlet* to test that the product lights up. If you are planning to use additional Extension Cables, you can also connect them to test the full layout. If any problems occur, reach out to customer support.
Socket must be a Ground Fault Circuit Interrupter (GFCI)
Step 2: Download Nanoleaf App
Pair your Permanent Outdoor Lights with the Nanoleaf App prior to installation. Ensure that your mobile device is within 10m/30ft of the controller during pairing.
Step 3: Test Connection
Make sure you test the connection before setting up your lights. Ensure the controller is within the Wi-Fi range of your home.
We recommend working with a professional for installation. DIY installation is possible for users comfortable with exterior handywork.
The following tools are required for installation:
1. Plan Your Layout
Based on where your outdoor socket is located, (where your lights will be plugged in), plan where your Controller and the rest of your Permanent Outdoor Lights will be mounted.
2. Prepare the Surface
Wipe down the surface you’ll be mounting your Permanent Outdoor Lights on.
3. Mount Power Supply & Controller (optional)
If you’d like to keep things neat and tidy, you can mount your power supply unit and controller onto the wall. But it is also perfectly fine to leave them hanging free too!
Use the cable clips provided to keep the cable that connects the controller and the first puck of your set up neat and tidy.
Use the mounting tape behind the cable clips to stick it to the surface. Make sure to secure it with a button head screw if using cable clips directly on your soffit (the underside of your roof).
4. Prepare Your Installation Tool
This tool helps to ensure that all pucks in your layout are the same distance from the wall.
For the best lighting effect, pucks should be installed 2-4 inches (5-10 cm) away from the wall surface. Cut the Installation Tool to your desired length, then place it flush against the wall with the groove sticking out to guide where you should be placing each puck.
5. Mount Your First Puck
6. Mount The Rest of The Pucks
Every 5m light string segment has a shorter cable on each end. Cover these shorter sides with the Short Cable Covers.
You must use Cable Cover Clips (screw mount with counter sunk screws) on these shorter ends. Place them next to the connection port (the end where one light string segment connects to another) before snapping on the short cable cover.
7. Screw on Waterproof End Cap
Ensure the last string of your setup has a waterproof cap installed and screwed on tight.
You can trim your light string using a wire stripper (not included). for a more perfect fit along your house. If you have to trim the last 5m segment of your layout, we suggest doing it from the side connected to the previous light string segment.
Important
Cutting and joining of the wires should only be done by a qualified professional. Do NOT attempt to use a wire stripper on the cabling for the Power Supply Unit or Controller. This will render your system inoperable and voids the warranty.
Using the Wire Splicer
There are two wire splicers provided – one with a female wire connector end, and one with a male wire connector end.
The wire splicer you use is dependent on whether you’ll be reconnecting your cut light string to a female or male connector end (each light string has a male and female connector end too).
If reconnecting to a female end, use the Male Wire Splicer. If reconnecting to a male end of a light string, use the Female Wire Splicer.
1. Prep Your Wire Splicer
2. Cut Your Light String
Cut the light string between two pucks using a wire stripper (not included). WARNING: Disconnect power supply before cutting.
3. Feed Cut Light String Through Wire Splicer
Slot the Locking Nut (C), Silicone Plug (B), and Shell (A) through the light string you just cut. The Locking Nut should be placed closest to the puck.
4. Reveal Insulated Wires
5. Attach Wire Splicer Connector
6. Reconnect to Extension Cable or Next String Light
To wrap the Light String around corners, follow these steps:
We think there might be a better match for your location and language :) You can set these below for local prices and the fastest delivery. Wir glauben, dass es für Ihren Standort und Ihre Sprache eine bessere Übereinstimmung geben könnte :) Diese können diese unten einstellen, um lokale Preise und die schnellste Lieferung zu erhalten. Nous pensons qu’il pourrait y avoir de meilleurs résultats correspondant à votre emplacement et à votre langue :) Vous pouvez les préciser ci-dessous pour avoir une idée sur les prix locaux et les meilleurs délais de livraison. Kami pikir mungkin ada kecocokan yang lebih baik untuk lokasi dan bahasa Anda :) Anda dapat mengaturnya di bawah ini untuk harga lokal dan pengiriman tercepat. Potrebbe esserci una corrispondenza migliore per la località e la lingua da te scelta :) Impostale qui sotto per i prezzi a livello locale e una consegna più rapida. お客様の地域や言語によりピッタリのウェブページをお選びください :)以下から、現地の価格や最短の配信をご設定いただけます。 귀하의 위치와 언어에 더 적합한 매치가 있으리라 생각합니다. 지역 금액 및 가장 빠른 배송을 위해 귀하는 위치와 언어를 아래에서 설정할 수 있습니다. เราพบว่ามีตัวเลือกที่ดีกว่าสำหรับที่อยู่และภาษาของคุณ คุณสามารถตั้งค่าข้อมูลเหล่านี้ด้านล่างสำหรับราคาท้องถิ่นและเวลาจัดส่งที่เร็วที่สุด Chúng tôi nghĩ rằng có thể có sự phù hợp tốt hơn cho vị trí và ngôn ngữ của bạn :) Bạn có thể đặt những điều này bên dưới để có giá địa phương và giao hàng nhanh nhất. 使用自己的位置和語言肯定更順手吧:)您可以在下方設定這些選項，並取得當地價格與最快的交付。
