Need your gifts by Dec 24th?
想於24/12前收到你的禮物?
Congratulations on becoming an official owner of the Nanoleaf Light Panels. Remember, you can grow your setup with Expansion Packs to unleash your creativity to the fullest. Thank you for your support, you brighten our day like Nanoleaf brightens the world!
Slow down tiger! Before you mount your panels onto the wall, plug it in to a power source and try it out on a table or floor. Make sure your design fits into your space by measuring the width and height of your intended setup (stencils or panels on the table). For the best placement of your Nanoleaf Light Panels, please refer to Placement Recommendations. You can also use the tools below to help plan out your design!
Explore different panel layouts with the Layout Assistant here and preview them in your room using the AR feature. Download the Nanoleaf App and open the Layout Assistant to get started.
Extend the possibilities of your Nanoleaf Light Panels even further! Bend around corners, mount the Canvas to angled surfaces, maybe even create something a little radical. Each linker bends up to 180 degrees, available on the Nanoleaf Shop.
Recreate your design on the wall by taping the stencils up. Check for obstructions, make sure you like the positioning, and mark the wall lightly with pencil or masking tape to assist when mounting the panels.
Get inspired by the Nanoleaf community, check out our Social Media channels to see what other Nanoleaf owners are creating or explore the Nanoleaf Inspirations.
Remember to share your designs with us on social media by tagging @nanoleaf and #nanoleaf. Follow us to stay updated on upcoming giveaways, special promotions, and product updates.
The Nanoleaf Light Panels should only be installed in an indoor environment on a flat surface that can support the weight of the panels. Clean the surface so that it is dry and clean from any dust, debris, or oil.
note:Installations using mounting tape on textured, porous, popcorn and ceiling surfaces is not recommended. The optional Nanoleaf Screw Mount Kit for Light Panels will be better for these surfaces.
Use the included mounting tape to securely attach the panels. We recommend using 3 pieces of mounting tape for each panel.
Designate a panel from your setup as the starting panel. Peel off the other side of the tape and press the panel firmly against the wall. Hold each corner for 30 seconds to ensure that your panel attaches firmly.
note:Make sure to leave ends of the tape sticking out. This will allow you to safely remove them later from the wall.
Connect your controller into an available linker slot of the first panel and plug in the other end to a power source. This will ensure that your setup is on and properly connected as you continue to link your panels together.
note:This positioning can be changed after your setup has been completed. An additional controller and power supply is required for every additional 30 panels.
Continue to link each panel together and ensure that each panel lights up as you do so. Make sure the linkers are fully slotted into the linker slot, the panels should be aligned edge to edge.
The Rhythm Module is included with any purchase of the Nanoleaf Light Panels Smarter Kit. It can also be bought separately to upgrade any larger setup. To connect the Rhythm, insert it into any available linker slot.
Using headphones but still want to see your panels react to music? Use a 3.5 mm audio cable and splitter to connect the Rhythm to an audio source. Audio cables and splitters do not come with any Nanoleaf products.
With one hand on the Light Panels, use your other hand to pull the ends of tape along the wall. Do not pull perpendicularly or at any other angle, otherwise you may damange your wall. Continue removing the tape from each panel until they are all safely removed.
Be even more creative and grow your setup with Expansion Packs. An additional power supply is required for every 30 light panels. One controller can support up to 30 light panels.
get one today
To ensure a smooth pairing process, please make sure you have the following things ready:
Requires iOS 10+
Can be found on your Welcome Card, Controller or PSU.
5 GHz networks are not compatible with Nanoleaf products.
The controller is ready when the Status LED is solid white.
You can find the official Nanoleaf Smarter Series App in the App Store. Make sure you have the latest version.
Select the MORE tab. · · ·
Select MY DEVICES and + to add a device.
Select Light Panels as your product and START PAIRING.
NOTE: If you have more than one set of panels connected to your network, select the magnifying glass to identify the correct setup (it will flash green).
Once identified and selected, the camera will open.
Scan your pairing code to pair.
Your Nanoleaf Light Panels should now be connected and ready to go!
1. Select Don’t Have a Code or Can’t Scan?
2. Enter your 8-digit pairing code (found on the Quick Start Guide, PSU or back of the Controller).
1. After Step 2.4 in the Standard Pairing Process above, hold the top of your device over the buttons of your Controller to pair.
This is accomplished with the Apple Home App and the Nanoleaf App.
Open the Nanoleaf App.
Select the MORE tab. · · ·
Select USERS.
Invite the secondary user with their email address.
A notification will appear for you to accept.
In the Home App, select the home icon in the top left.
Select HOME SETTINGS, a list of homes will appear.
Accept the home that has been shared with you. This will give you control of the Light Panels as well as any other HomeKit devices in the same home.
To ensure a smooth pairing process, please make sure you have the following things ready:
Requires Android 5.0+
Can be found on your Welcome Card, Controller or PSU.
5 GHz networks are not compatible with Nanoleaf products.
The controller is ready when the Status LED is solid white.
You can find the official Nanoleaf Smarter Series App in the Google Play Store. Make sure you have the latest version.
Ensure your location settings are turned on.
Select DEVICES, located in the side menu on the left.
Select + to add a device.
Select Light Panels as your product and choose one of the following options to pair:
1. Scan the Welcome Card, Controller or PSU
1. Ensure that NFC is enabled.
2. Hold the top of your device over the buttons of your Controller to pair.
1. If you have more than one set of panels connected to your network, select the magnifying glass to identify the correct setup (it will flash green).
2. Once identified, TAP TO PAIR.
3. Enter your 8-digit pairing code (found on the Quick Start Guide, PSU or Controller).
No Wi-Fi? No Problem! The Nanoleaf Light Panels work right out of the box. Find hundreds of pre-saved Scenes by using the Toggle Button on the controller. Refer to Common Solutions if you are experiencing any connection issues.
To cycle between Colour Scenes, press to adjust the brightness, hold.
Turn your lighting on and off, control brightness, group lights by home and by room, create and use Scenes, and much more.
Choose an existing Scene or create your own (Static, Dynamic, Rhythm, Group, Layered). You can also use the Paint Tool to colour panels individually.
Find helpful information including tutorials, new device features, etc.
Find and download new Scenes created by the Nanoleaf community.
Automate your Scenes to turn on or off.
With the Nanoleaf Desktop App, you can control your Light Panels from a web browser on your computer. Create and download new Scenes and set Schedules right from your computer. The Desktop App was designed to simplify the management of larger installations and offer control of many different layouts at once.
You can easily control your Panels by voice in a few different ways. In the Nanoleaf App, make sure to name your panels something easy to say.
“Turn [Device Name] on/off.”
“Set [Device Name] to 10% brightness.”
“Set [Device Name] to [Scene Name]”
“Brighten/dim the lights to [%].”
“Set [Device Name] to [Colour].”
“Set [Scene Name].”
“Brighten/dim the lights.”
“Turn on [Device Name or Scene Name].” “Turn on/off the lights in [Room Name].” “Turn on/off all my lights.”
“Turn off [Device Name].”
“Brighten/dim [Device Name].”
“Brighten/dim the lights in [Room Name].” “Brighten/dim all my lights.”
“Set [Device Name] to [%].”
“Set [Device Name] to [Colour].”
“Turn on [Device Name or Scene Name].” “Turn off [Device Name].”
“Brighten/dim [Device Name].”
“Set [Device Name] to [%] brightness.” “Set [Device Name] to [Colour].”
The optional Nanoleaf Remote accessory is a sleek, dodecahedron-inspired Bluetooth HomeKit remote designed to enhance the smarter home experience and make controlling the Nanoleaf Light Panels and other HomeKit products even more convenient. Available on the Nanoleaf Shop.
Control the brightness of your Panels by rotating the remote clockwise and counterclockwise.
Save your favourite Scenes to any of the twelve sides. Face up to activate.
A local network API designed to extend your experience and allow you to integrate the Panels with third party devices and services, as well as enable more granular control of the hardware.
This will reset the Wi-Fi and all saved pairing configurations. Your saved scenes will remain.
Press and hold the Power and brighten buttons together on the Controller for 15 seconds.
Let go once the Status LED starts flashing.
Wait for the Power button LED to remain on and steady.
On the Nanoleaf App, delete the previous device and re-pair it again.
This will reset your Light Panels to factory settings, deleting Wi-Fi settings, pairing information, and saved scenes. Your default scenes and settings will be restored.
NOTE: You can restore your Scenes after a Hard Reset if you are logged in to your Nanoleaf Account (see Restore Scenes procedure below).
Ensure your location settings are turned on.
Press and hold the Toggle and Power buttons together on the controller, and plug the controller back into power without releasing the buttons.
After about 10 seconds, the Status LED will begin to flash rapidly, release the buttons.
Wait about 2 minutes for a reboot.
Your Light Panels should be reset when it begins flowing with colour and the Status LED reflects a solid white.
Requires Firmware 3.1.0+
Requires Software 3.4+ for iOS & Android
Open the Nanoleaf App.
Login to your Nanoleaf Account.
In the Dashboard tab, select the Settings icon in the top right.
scroll down to BACKUP AND RESTORE, under SYSTEM.
Make sure DEVICE SYNC is disabled.
Select RESTORE FROM BACKUP and RESTORE.
This will allow you to connect your Light Panels to a new Wi-FI network.
Plug your Light Panels in to a power source.
With the Power and the Brighten buttons on the Controller, press and alternate between them 5 times (10 presses total).
The Status LED will become a solid white.
On your phone, toggle the Wi-Fi off, then on again.
Unplug your controller from power, then plug it back in.
On your phone, toggle the Wi-Fi off, then on again.
5 GHz networks are nor compatible with Nanoleaf products. Are you connected to a 2.4 GHz network?
Ensure multicast, IGMP, UPnP (if available) are enabled on your router settings.
Plug your PSU into power. The Power button on the Controller will light up after 1 minute.
Meaning: Your Light Panels are ready to connect to your network.
Make sure your mobile device Wi-Fi is on.
Move your mobile device closer to your panels.
Toggle the Wi-Fi on your mobile device off, then on.
Try a Hard Reset.
Meaning: Your Wi-Fi configuration has timed out.
Try to Power Cycle your controller (unplug your controller from power, then plug it back in).
Try a Soft Reset
Meaning: Your Wi-Fi is configured, but the panels cannot connect to the target network.
Power Cycle your router (unplug your router from power, then plug it back in).
If your panels are paired on the Nanoleaf App, delete the device and re-pair them with the Standard Pairing Process.
Try a Soft Reset.
Meaning: Your Wi-Fi is configured and connected to your router.
Make sure your mobile device is on the same network.
Toggle the Wi-Fi on your mobile device off, then on.
Your Wi-Fi is configured, but the panels cannot connect to the target network.
Place your Light Panels in an open area where there are less obstructions, such as large pieces of furniture or walls.
Avoid placing your Light Panels behind furniture or inside cabinets.
Don‘t place your Light Panels in areas surrounded by metal surfaces on three or more sides. This can cause signal issues.
Try to place your Light Panels at least 25 feet (8 metres) away from any microwave oven, 2.4 GHz cordless phone, Wi-Fi devices, or other source of interference.
Place your Light Panels as close to your Wi-Fi home router as possible. For best performance, keep the distance below 65 feet (20 metres) and have no more than one wall in between.
Enclosed locations that limit the flow of air and/or trap excessive amounts of heat.
Emergency exits or emergency lights.
Conjunction with 3rd party sensors/timing devices that are not approved by Nanoleaf.
Places where there is a risk of electric shock.
Outdoor areas.
Wet or damp conditions.
Excessively hot environments (e.g. close to ovens, radiators, heaters, etc).
Regions or countries other than that in which the product was intended for.
Do not open the device, as this will void the warranty.
Do not place any metallic or conductive objects near the exposed contacts on the Nanoleaf Light Panels controller, power supply, linkers, or back of the Nanoleaf Light Panels panels.
Do not allow small children to operate this device unsupervised. This device contains small parts that may be a choking hazard to small children.
Do not clean the device when it is on and or connected to power.
Clean the panels with a soft dry cloth, do not use cleaning agents.
Do not bend the panels with the linker still attached.
Do not attach the panels together with anything other than its original panel linkers.
Do not puncture the panels with any nails or screws during installation.
Do not attach the panels to a ceiling without consulting a qualified contractor and using additional mounting hardware designed to prevent the panels from falling.
Do not attach the panels to the floor where they may get stepped on.
Do not place the panels in water, or expose the panels to water.
Do not use mounting tape for the following surfaces: brick or mortar wall, wallpaper, uneven/bumpy or textured surfaces.
All data collected and processed is handled in accordance with our privacy policy. We do not sell your personal information to third parties, and collected data is anonymised and aggregated to cohorts wherever possible. "First Party" cookies refers to data usage on this website, and generally cannot be disabled without breaking core functionality. "Third Party" cookies refers to cookies which are stored in your browser and accessible by a third party vendor. Please see the appropriate tabs for more information.
We use your IP address to determine the country which you're connecting from and suggest the locale which is most relevant to your physical location (localising product information, availability, and currency). Data processing is conducted on the client side (your browser), and your location preference is stored in a cookie in your browser. Pinpointing your location by this service is restricted to the country level, and is not sent to our servers for storage or further analysis.
We use the preferred language settings provided by the user-agent of your browser to suggest content which is available in your language. Data processing is conducted on the client side (your browser), and your language preference is stored in a cookie in your browser. This information is not sent to our servers for storage or further analysis.
Upon login with an eligible Nanoleaf account, we generate a hashed and anonymised token and store it in your browser. This facilitates single sign on for various accounts that you use to interact with our products and services (Nanoleaf Shop, Nanoleaf Helpdesk, Nanoleaf App, and/or Nanoleaf Cloud). This token does interact with third party services if you log into our website, but is designed in such a way that it cannot be used to identify you without access to additional data (specifically, a database containing information registered in any of your Nanoleaf user accounts). For more information on these interactions, please review the "Third Party" and "Data Vendors" sections.
We use Google Analytics to analyse aggregate behaviour on our website, with the goal of using these aggregated data sets to improve user experience, website performance, and relevance of the content that we publish. We do not use the user-id-session collection function, and do not analyse individual user sessions using Google Analytics. We do create remarketing lists with Google Analytics, which at aggregate are used to improve the relevance of paid advertising for users who have not opted out of data collection with Google (please see the "Data Vendors" tab for opt-out instructions). These lists cannot be used by Nanoleaf to personally identify you. On the European locales of our website, IP addresses are anonymised by local servers before data is processed by Google Analytics. Please note that anonymised data may be sent to these third countries : United States, Canada, Hong Kong.
We use Google Optimise to analyse aggregate visitor preferences and help determine whether the content which we publish on our website is useful for visitors. This includes "A/B" and "Multivariant" tests of content and website design/layout. The information collected through this analysis is of an aggregate, anonymous nature (user-id-session is not collected).
We use Google Ads to promote our products and services in various countries, including the United Kingdom and the member states of the European Union. Ad products which we utilise include AdWords (text and search), Display (banner), and various formats of video advertising units on YouTube. Google Ads is a subprocessor of aggregate data collected via Google Analytics and shared with Google Ads in an anonymised manner (user-id-session is not transmitted, since it is not collected). Ad personalization signals are disabled by default for users in the EU and UK. This prevents the use of remarketing and retargeting advertisements unless a visitor has opted in for this use.
We use Facebook Connect to record behavioural activity related to sales, and to improve the relevance of marketing and advertising to "look-alike cohorts". In practice, this means that an anomymous Facebook user-id is generated after the completion of a sale and sent to Facebook to attribute against a set of user data in their posession. At aggregate, this data is used to improve the targeting of advertising to visitors on Facebook, Instagram, and other properties owned by Meta (primarily by identifying "like" users on these platforms who may find the advertisements relevant).
We use Twitter Connect to record certain behavioural actions on Twitter (for example, link clicks to our website) and analyse the associated behaviours on our website with the goal of improving the experience that visitors have, and determine which content is relevant. This data is aggregated and anonymous in nature, individual user sessions are not analysed and Nanoleaf cannot attribute this data to its own personally-identifiable data stored in user accounts for Nanoleaf services.
We use Funnelytics to determine the success of marketing campaigns in aggregate, on narrowly-defined sets of website landing pages and purchase checkouts. This data is aggregated and anonymous in nature, and cannot be used by Nanoleaf to personally identify a visitor to our website.
We use Shopify to process purchases on our website in a PCI DSS compliant checkout environment which meets PSD2 requirements as required by law in the European Union. All payment transactions are processed in France, and are compliant with national law as well as the regulations proscribed by the European Commission. When you make a purchase on the Nanoleaf Shop, data essential to the processing and fulfilment of your purchase is shared with Shopify (the processor) and accessed by Nanoleaf as required to fulfil your order (the sub-processor). Purchase data is aggregated and processed by Nanoleaf for reporting purposes (these reports are not shared with other parties under any circumstances). Personally-identifiable information is used only to provide order fulfilment and customer service (either at your request, or proactively when we identify in advance service or logistics disruptions which may impact you). All data collected and stored on Shopify's servers is subject to the right to be forgotten, and you may request deletion of such data at any time by contacting us to initiate the request on your behalf. After a request has been initiated, Shopify will communicate with you directly solely in regards to the progress of your data deletion request. Please see the ""Data Vendors"" section for more information.
We use Sendinblue to provide certain transactional and marketing-related email or SMS communications with your explicit permission (the opt-in mechanism required when signing up for a contact list on our website). At our direction, Sendinblue facilitates the communication of commercial and non-commercial messages based on the permissions which you gave during the sign-up process. Some examples include limited-time promotions, general company news and updates, or product-specific news and updates related to devices which you have indicated that you own (or have purchased through the Nanoleaf Shop on our website). All data collected and stored on Sendinblue's servers is subject to the right to be forgotten, and you may request deletion of such data by contacting us. Personally-identifiable information is limited to your contact record, which only includes information which you have volunteered during the signup process (common data attributes are name, email address, country of domicile, language preference, and products owned).
We use Gorgias to facilitate customer service, order support, and technical support interactions via LiveChat on our website, telephone (IP telephony), social media messaging, and email messaging. Personally-identifiable information is required to facilitate these interactions, which includes your email address and (optionally) your name and telephone number. Order reference numbers and device serial numbers are also commonly requested to facilitate such interactions, although these cannot be used in isolation to personally identify you. Gorgias stores your contact details and case history, which enables us to provide better (and more expedient) customer service in the future. You can request deletion of any case or your case history at any time by contacting us.
Data is Anonymised : Yes
Data Storage Locations : France, Canada, United States, Hong Kong
Data Usage Purposes : Technical Analysis, Marketing
To disable the collection of data for processing with Google Analytics, you can instal the opt-out tool here
Data is Anonymised : Yes
Data Storage Locations : France, Canada, United States, Hong Kong
Data Usage Purposes : Technical Analysis, Marketing
Data is Anonymised : No
Data Storage Locations : Canada, United States, Hong Kong
Data Usage Purposes : Marketing
Google's privacy policy can be found here
Data is Anonymised: No
Data Storage Locations: United States
Data Usage Purposes: Marketing
Facebook's privacy policy can be found here
Data is Anonymised: No
Data Storage Locations: United States
Data Usage Purposes: Marketing
Twitter's privacy policy can be found here
Data is Anonymised: Yes
Data Storage Locations: Canada
Data Usage Purposes: Marketing
Funnelytics' privacy policy can be found here
Data is Anonymised: No
Data Storage Locations: France, Canada, Hong Kong, Japan, Viet Nam
Data Usage Purposes: Order Processing and Fulfilment
Please note that personally-identifiable information for EU and UK customers is stored in France, and may be sub-processed in Canada. This data is not stored in the other locations listed (rather, the data for customers in those regions is stored locally).
To submit a right to be forgotten request, please contact Nanoleaf Support
More information on how Shopify manages GDPR compliance and deletion requests is available here
Data is Anonymised: No
Data Storage Locations: France
Data Usage Purposes: Marketing, Non-Marketing Communications
To submit a right to be forgotten request, please contact Nanoleaf Support
More information on how Sendinblue manages GDPR compliance is available here
Data is Anonymised: No
Data Storage Locations: United States
Data Usage Purposes: Customer Service
To submit a right to be forgotten request, please contact Nanoleaf Support
More information on how Gorgias manages GDPR compliance is available here
We think there might be a better match for your location and language :) You can set these below for local prices and the fastest delivery. Wir glauben, dass es für Ihren Standort und Ihre Sprache eine bessere Übereinstimmung geben könnte :) Diese können diese unten einstellen, um lokale Preise und die schnellste Lieferung zu erhalten. Nous pensons qu’il pourrait y avoir de meilleurs résultats correspondant à votre emplacement et à votre langue :) Vous pouvez les préciser ci-dessous pour avoir une idée sur les prix locaux et les meilleurs délais de livraison. Kami pikir mungkin ada kecocokan yang lebih baik untuk lokasi dan bahasa Anda :) Anda dapat mengaturnya di bawah ini untuk harga lokal dan pengiriman tercepat. Potrebbe esserci una corrispondenza migliore per la località e la lingua da te scelta :) Impostale qui sotto per i prezzi a livello locale e una consegna più rapida. お客様の地域や言語によりピッタリのウェブページをお選びください :)以下から、現地の価格や最短の配信をご設定いただけます。 귀하의 위치와 언어에 더 적합한 매치가 있으리라 생각합니다. 지역 금액 및 가장 빠른 배송을 위해 귀하는 위치와 언어를 아래에서 설정할 수 있습니다. เราพบว่ามีตัวเลือกที่ดีกว่าสำหรับที่อยู่และภาษาของคุณ คุณสามารถตั้งค่าข้อมูลเหล่านี้ด้านล่างสำหรับราคาท้องถิ่นและเวลาจัดส่งที่เร็วที่สุด Chúng tôi nghĩ rằng có thể có sự phù hợp tốt hơn cho vị trí và ngôn ngữ của bạn :) Bạn có thể đặt những điều này bên dưới để có giá địa phương và giao hàng nhanh nhất. 使用自己的位置和語言肯定更順手吧:)您可以在下方設定這些選項，並取得當地價格與最快的交付。
Get HelpWelcome! Our team is available for livechat 24/7 and normally responds within 5 minutes. In the meantime, you can also check out our Helpdesk for answers to common questions and simple fixes!
What can we help you with today?
*Coming Soon
**Excludes Nanoleaf Essentials