This website uses first and third party cookies to personalise your experience, analyse web traffic data, and optimise performance. We never sell your data to third parties. Privacy Policy.
Nanoleaf 4D User Manual
Pairing & Setting Up Your Nanoleaf 4D for Android
To ensure a smooth pairing process, please make sure you have the following things ready:
Requires Android 9+, turn ON Bluetooth, and Google Play Services app version 22.48.14. Ensure your location settings are enabled on your device.
A QR code and/or a 8 digit code on your Quick Start Guide or on the back of the Controller.
2.4 GHZ Wi-Fi is required. 5 GHz networks are not compatible with Nanoleaf products.
The Controller is ready when all the LED lights on the Controller are solid white.
Download and Open the Nanoleaf App
You can find the official Nanoleaf App in the Play Store. Make sure you have the latest version.
Pair Your Nanoleaf 4D
- On the Dashboard, tap the pencil icon in the top right corner.
- Tap “Add Device +”
- Scan the QR code or manually enter the 8 digit pairing code to start the pairing process
- Follow the instructions on the screen to complete pairing
- Your Nanoleaf 4D should now be connected and ready for App setup
If you’d like your Nanoleaf 4D products to sync up with other Nanoleaf RGB lights, it’s important that you place them in the same room (both physically and on the app when assigning devices to rooms).
The Nanoleaf Sync+ feature virtually connects your lights within your 3D space to extend screen mirroring lighting effects across multiple Nanoleaf RGB devices.
Setting Up and Calibrating with the Nanoleaf App
Once pairing is complete, indicate whether your camera is set up above or below your TV screen or monitor.
Follow the instructions on the App to calibrate your Lightstrip and/or camera. You can always recalibrate your Nanoleaf 4D products by going to your 4D device settings and clicking on Calibration.
Tips for best results:
- Close curtains or turn off ambient lighting before calibration
- If camera is mounted on top, tilt to a lower angle so that it can see the whole screen
- Turn on your TV while calibrating so that the screen contrasts against the frame and the corners are easier to locate
- Move all the calibration points slightly closer together, further away from the edge of the screen to reduce the room for error
Enable Sync+ if you would like your screen mirroring to flow across multiple Nanoleaf RGB light products in the same room. See the “Enabling Sync+” section below for more detailed instructions.