A local network API designed to extend your product experience. Integrate your setup with third party devices and services and enable more granular control of the hardware.
- Product Setup
- Before You Pair Your Essentials (Matter)
- Standard Pairing Process with iOS
- Standard Pairing Process with Android
- Pairing with Smart Home Ecosystems
- Sharing Matter Devices between Ecosystems
- Controlling Your Essentials
- Problems & Solutions
Bulbs User Manual
If you’re experiencing any issues with your Essentials Bulb, try these steps:
Power cycling your lights by unplugging them from power and then plugging them back in. You can also try to unscrew it from the socket (make sure it's powered off before you do it), and then screw it back in.
Try toggling your Bluetooth off and back on, restarting the app you’re using to control your lights, or restarting your device.
Check a Switch
Make sure that your lights weren’t turned off by a physical switch as this would make them powered down and unresponsive.
Perform a Reset
This will delete your pairing and network information, so once the reset is performed you will need to pair again. Before performing this reset, delete your Essentials Bulb from your device.
To perform the factory reset on the Essentials Bulb, switch the Bulb off, wait for 3 seconds, then switch it back on for no more than 1 second. Repeat this for a total of 5 cycles. If the reset is successful, the Bulb will flash red three times, and then it’s ready to be paired again.
If you’ve performed all of these steps and your issue still persists, please reach out to our support team for further assistance.REACH OUT